Color Splash 2G Replacement Multi-Color LED In-Ground Pool Lights offer seven solid colors, multiple color blends and five light shows that can instantly transform the consumer’s pool and spa area into a color-rich paradise. They use an Edison base, so they install easily into the consumer’s existing fixture in just minutes. Plus, Color Splash’s LED technology makes them the most energy efficient and longest lasting of their kind on the market.
- LED technology. Energy efficient, 35.3 and 12 watt lights reduce consumer's electric bill immediately.
- Edison base light. Uses same light base as pool lights for quick and easy replacement.
- Synchronizing. Multiple lights operate in unison to harmonize your backyard lighting.
- Proprietary cooling system. Maximizes lifespan of up to 100,000 hours.
- 5-year warranty. Lasting quality you can rely on for years.
Your Color Splash Replacement Multi-Color LED In-ground Pool or Spa light has seven solid colors
available for you to experience.
Colors can be selected using the Color Lock feature.
- Parisian Blue
- Brazilian Red
- Tahitian Blue
- Miami Pink
- Tuscan Orange
- Arctic White
- New Zealand Green
Your Color Splash light has ﬁve light shows from which you can choose:
The ﬁrst three light shows display all seven solid colors, while the last two display selected colors.
- Slow Splash
- Fast Splash
- Super Slow Splash
- Patriotic Splash
- Tidal Splash
All light shows, except Fast Splash, allow you to view multiple color blends. Color blends occur
when the light gradually blends one solid color into the next. Using the Color Lock feature, you can
stop the light at any point during the transition to select a color blend.
Color Splash Replacement Multi-Color LED In-ground Pool and Spa lights are pre-programmed
and synchronous with each other while offering a wide array of lighting effects and options. They
offer ﬁve different light shows to choose from, as well as a Color Lock feature which allows you to
‘lock’ the light on any of the solid colors or color blends. The Color Splash light does not require any
special hardware, as it is controlled by using your existing pool light power switch.
Using the Color Lock feature: The Color Lock feature allows you to ‘lock’ the light on any of
the solid colors or color blends. To activate the Color Lock feature during any of the Color Splash
Replacement Multi-Color LED In-ground Pool or Spa light’s shows, turn the pool light power off
and then back on again within 2 seconds. To deactivate the Color Lock feature and resume the light
show, turn the pool light power off and then back on again within 2 seconds.
To move from one light show to another, turn the pool light power off
for 3-4 seconds and then back on again.
Slow Splash (Factory Default Light Show.)
Show: Slow cross-fade through all seven solid colors.
Cycle: Two minute color sequence cycle with slow cross-fade between colors. Light will hold on each
solid color for 8 seconds before moving to the next.
Show: Quick and random ﬂashes through the seven solid colors.
Cycle: Random fast change between solid colors in half second intervals.
Super Slow Splash
Show: Very slow cross-fade through all seven solid colors.
Cycle: Seventy-seven minute color sequence cycle with super slow cross-fade between solid colors.
Light will stay on each solid color for 10 minutes before moving to the next.
Show: Quick cross-fade through red, white and blue.
Cycle: Eleven second cycle through red, white and blue with quick cross-fade between colors. Light
will stay on each solid color for 3 seconds before moving to the next.
Show: Slow cross-fade between green and blue.
Cycle: Twenty-four second cycle through green and blue with slow cross-fade between solid colors.
(TIP: The Slow Splash light show is the best show to use in order to practice using the Color Lock feature of the light.)
Memory Mode: When your Color Splash Replacement Multi-Color LED In-ground Pool and Spa lights
are turned off for at least 8 seconds, the color or light show on display will be stored. The next time
the power is turned on, the light will resume displaying that same color or light show.
Reset Mode:For multi-light installations, should your Color Splash Replacement Multi-Color LED
Pool or Spa lights become asynchronous (non-synchronous), you can reset your lights using your pool
light switch. To activate the reset mode, turn the power off for 5-7 seconds and then back on again.
The lights will indicate that they have been reset by ﬂashing red a few times. When you reset the
Color Splash lights they will go back to the Slow Splash light show.
NOTE: Your Color Splash Replacement Multi-Color LED In-ground Pool and Spa lights are “synchronous”, meaning you
can experience the same light shows in your pool and spa at the same time. However, all of the pool and spa lights must
be on the same electrical circuit for this feature to be operational. Please consult a qualiﬁed electrician to determine your speciﬁc pool and spa circuit conﬁguration.