This line of Air or Remote Operated Controls is specially designed to control pool/spa combinations economically and reliably away from the equipment. With one touch, these units automatically override the 24 HR. timer and turn ON the filter pump, switch the valves from pool-filter mode to the spa/water feature mode and switch the compatable dual thermostat on the heater/heat pump from the pre-set pool temperature to the pre-set spa temperature. Comes complete with two PE24VA 24-Volt valve actuators.
- Can be used with spring wound timer, toggle switch, or wireless receiver with transmitter to operate equipmentIncludes Air or Remote Control & two PE24VA 24 Volt Valve Actuators
- Case: 16-1/2" (41.9 cm) H x 10-7/8" (27.6 cm) W x 4-1/4" (10.8 cm) D, 0.048" steel with electrostatically applied beige finish.
- Knockouts: Two 1/2", three combination 1/2"-3/4", and two combination 3/4"-1" knockouts on the bottom. Four 1/2", three combination 1/2"-3/4" on the back. One combination 3/4"-1" on the left side. One 1-3/4" x 2-3/4" knockout on the right side for mounting switches and GFCI.
- Panel Rating: 100 Amp 120-240 VAC. or 120-208 VAC single phase - 60 HZ.
- Actuator Circuit: 24V. - 40 Amp Max.
- Agency Approval: CSA/C-US
- Voltage: 120/240Number of Valve Actuator Connections: 3Heater Control: Yes