These Air Switches are designed to control one piece of equipment with one air button. The switch can safely control loads without electricity at the pool or spa or tub side, for example a pump, blower or a light. Each time pressure is applied to the remote air button the connected equipment will operate as described in the table. Model RC2113ST has a built-in 10 minute automatic shut down timer. However, the operation can be stopped any time during the cycle by simply pressing the air button.
- Case: Plastic for indoor/outdoor installation. 4-1/8" (10.5 cm) high x 4-1/8" (10.5 cm) wide x 3-3/8" (8.6 cm) deep.
- Electrical Rating: 20 Amp resistive 120-240 V.A.C., 1 H.P., 120 V.A.C., 2 H.P., 240 V.A.C.
- Voltage: All models except RC2112S operate either on 120 V.A.C., (Line and Neutral) or 240 V.A.C., (Line 1, and Line 2 and Neutral). On 50 Hz. operation, models with suffix ±T? will time out in 11 minutes. Model RC2112S operates on 240 V.A.C. only.
- Maximum Range: 100 ft
- Agency Approval: CSA/C-US
Note: The actual distance between the control and air button depends on the amount of displaced air, the inside diameter of the air hose and other factors beyond the control of the manufacturer.